Accelerate the process of mushroom bud formation-Satrise Mushroom

Accelerate the process of mushroom bud formation
1. Objective: To artificially regulate the temperature, humidity, phosgene and other environmental factors in the mushroom shed, so as to promote the occurrence of hypha kink primordium, and then develop the mushroom bud.
2.Temperature, humidity and photoperic gas standard: the space temperature is 10-26℃, 16-24℃ is the best, the temperature difference between day and night is 8-10℃ and above, the temperature of fungus sticks is 15-23℃ and 18-22℃ is the best.The humidity in space is 80-90%, and the humidity difference between day and night is about 10%.The water content of the fungus sticks is 58-60%.Light, 300-1000 lux by day;Air, full of freshness, CARBON dioxide 500-1400 PPM.(mushroom shed)
mushroom shed
3.Specific operation method: according to the structural characteristics of the greenhouse, with the production facilities and production tools, in different seasons of the natural environment and climate conditions, the greenhouse temperature, humidity, light, carbon dioxide concentration as much as possible to adjust to suitable conditions for fruiting.The space temperature is controlled at 10-22 ℃ when the natural temperature is low, and there is a temperature difference of about 10℃ day and night, and the temperature of the fungus sticks is 12-18℃.The space temperature is controlled below 28℃ when the natural temperature is high, and the temperature of the fungus sticks is below 25℃. As far as possible, some temperature difference exists.Air relative humidity 80-90%, sufficient oxygen and scattered light.Lentinus edodes primordium differentiation temperature should not be lower than 8, long-term under 8 will not fruiting, conversely temperature higher than 28℃ is not easy to fruiting, and easy to form weak seedlings.The mushroom bud can be produced in 5-10 days after proper operation.(mushroom shed)

Contact us

© Zhengzhou Satrise Industry Co.,Ltd 2021-2026
+8615638938525